2026-05-11¶

[Claude Code] Session Checkpoint (auto, 09:00)¶

Last: Uptime is 255 hours, well above 26h. Early exit applies. ##SUMMARY## Finn uptime is 255h -- no reboot since last check, no verdict needed; followup will retry next cycle. NO REBOOT, no verdict neede…

[Claude Code] Session Checkpoint (auto, 13:45)¶

Last: Spawned. Opus47 session running the audit. URL: https://claude.ai/code/session_01XKoNfzzq1pWyvMiDuWbo3d Output will land at memory/handoffs/forge-health-audit-2026-05-11.md with a notify when done.…
[Claude Code] 13:47, created: /home/justinwieb/forge/memory/handoffs/forge-health-audit-2026-05-11.md

[Claude Code] Session Checkpoint (auto, 13:47)¶

Last: Audit complete and notified. Verdict: user-facing surface healthy, two background watchdogs silently dead for 8+ days. - Red (1): forge-canary.service failing every day since 2026-05-04 wi…

[Claude Code] Session Checkpoint (auto, 13:59)¶

Last: Canary fixed. Manual run completed cleanly: code=exited, status=0/SUCCESS, 3.2s CPU. Timer armed for tomorrow 06:00 CDT. Change: dropped User=/Group= lines and switched `WantedBy=multi-user…

[Claude Code] Session Checkpoint (auto, 13:59)¶

Last: Spawned. Submission needed two Enter retries but it's running. URL: https://claude.ai/code/session_017YsSb6LBui1WhXEUKWx18M Output will land at memory/handoffs/forge-todo-2026-05-11.md with a notif…
[Claude Code] 14:00, created: /home/justinwieb/forge/memory/handoffs/forge-todo-2026-05-11.md

[Claude Code] Session Checkpoint (auto, 14:00)¶

Last: Done. Punch list at memory/handoffs/forge-todo-2026-05-11.md and notify pushed. Top of the list: 1. In-flight: uncommitted 750-file Phoenix sweep, /recall v2 flip decision (queued followu…

[Claude Code] Session Checkpoint (auto, 14:01)¶

Last: ```json { "thought": "Justin is reporting he spent 1.5 hours at urgent care. This is a time block log (Health category) for the past 1.5 hours. Current time is 14:01 CT, so the block would cover rou…

[Claude Code] Session Checkpoint (auto, 14:03)¶

Last: Confirmed, canary is green. Last run 13:59:16 CDT exited 0/SUCCESS. No failed units anywhere. I'll strike that from the list. Plain-English translation of the rest: The 750 dirty files You have …

[Claude Code] Session Checkpoint (auto, 14:03)¶

Last: ```json { "thought": "Justin is asking for a straight assessment of how long he's been disengaged from his systems. I can synthesize this directly from the conversation history without any tool call…

[Claude Code] Session Checkpoint (auto, 14:04)¶

Last: ```json { "thought": "Justin is explaining the root cause of the calendar/tasks failures: Google OAuth token expiry every 5 days. He's aware and says fixes are coming. This is conversational context…

[Claude Code] Session Checkpoint (auto, 14:08)¶

Last: ```json { "thought": "Justin wants to verify calendar and email access are working. I'll call list_calendar_events and search_emails simultaneously to check both.", "actions": [ { "tool"…

[Claude Code] Session Checkpoint (auto, 14:08)¶

Last: ```json { "thought": "Calendar works fine - returned 3 events. Email search failed with a param error, likely I passed 'mailbox' instead of 'account'. Let me retry email search for both personal and…

[Claude Code] Session Checkpoint (auto, 14:08)¶

Last: ```json { "thought": "Calendar works fine, returned 3 upcoming events. Personal email is erroring (500 on the n8n webhook), business email is working.", "actions": [], "reply": "Calendar: workin…

[Claude Code] Session Checkpoint (auto, 14:09)¶

Last: ```json { "thought": "Pure architecture question, no tools needed. Calendar uses a direct Python client with its own OAuth credentials file. Personal email routes through n8n which is returning a 50…

[Claude Code] Session Checkpoint (auto, 14:12)¶

Last: ```json { "thought": "Justin wants to spawn an Opus worker to help with the personal Gmail n8n 500 error. I should spawn one with full context about the issue.", "actions": [ { "tool": "…

[Claude Code] Session Checkpoint (auto, 14:14)¶

Last: ```json { "thought": "Justin is asking whether the spawned opus worker is headless (pipe mode) vs a remote interactive session. He seems to want an interactive session instead. I should clarify what…

[Claude Code] Session Checkpoint (auto, 14:14)¶

Last: ```json { "thought": "Justin wants a remote interactive Opus session instead of headless. spawn_remote_session is a cold tool, need_full_tools:true to get access.", "actions": [], "reply": "Swit…

[Claude Code] Session Checkpoint (auto, 14:14)¶

Last: ```json { "thought": "Justin wants a remote interactive Opus session instead of the headless worker. Spawn a remote session with context about the personal Gmail n8n 500 error.", "actions": [ …

[Claude Code] Session Checkpoint (auto, 14:16)¶

Last: ```json { "thought": "spawn_remote_session failed with a boot timeout — the session process started but the prompt never appeared within 90s. This is likely a transient issue (MCP backlog, API key h…

[Claude Code] Session Checkpoint (auto, 14:16)¶

Last: Worker results: | # | Task | Status | |---|---|---| | 1 | Phoenix 750-file commit | running (agent a4010563892ab7607) | | 2 | Recall v2 bench | ✅ done, 3.29x lifetime ratio, no regressions, rec…

[Claude Code] Session Checkpoint (auto, 14:29)¶

Last: Status round-up + next round of to-dos: Done this round: - ✅ Recall v2 flipped to default (commit 88832b2) - ✅ MEMORY.md cap raised 200 → 300 in all three places (CLAUDE.md, FORGE-DOCTRINE.md, …

[Claude Code] Session Checkpoint (auto, 14:25)¶

Justin asked: to-do scan, then triage + fix in parallel via headless workers
Built/decided: Phoenix 750-file commit (in-flight), recall v2 flipped to default (88832b2, 3.29x lifetime), 12 mkdocs URL headers patched, 7 MEMORY.md orphans linked, cap raised 200 → 300, n8n delete blocked by 2 live callers, Plex CT 101 SSH confirmed hung (banner never returns), strategy spawn launched at session_01PrfKYq5FceoP8pDDvyZaTh
Next: compact MEMORY.md, cancel finn-rclone-postboot-verify followup, recheck 2 remaining mkdocs URL warnings, recover Plex CT 101

[Claude Code] Session Checkpoint (auto, 14:49)¶

Last: I'm Claude Code, your AI pair on Console. I read your forge (memory, system-map, skills) and execute: code edits, infra tweaks, fleet ops, content pipelines, brand work, automation. Today's quick con…

[Claude Code] Session Checkpoint (auto, 14:50)¶

Last: Got it, holding off on the two rejected workers. Looks like MEMORY.md is being compacted externally already (some entries already tightened in the diff). Where things stand: | Item | Status | |-…

[Claude Code] Session Checkpoint (auto, 14:50)¶

Last: Going OK. Quick state: - Phoenix commit worker: still hasn't landed a commit. Working tree is still 737 dirty (was 750 at start, so it's poking around but hasn't pulled the trigger). May be stuck…
[Claude Code] 14:51, created: /home/justinwieb/forge/memory/handoffs/n8n-google-migration-strategy-2026-05-11.briefing.md

[Claude Code] Session Checkpoint (auto, 14:52)¶

Last: Phoenix sweep committed as 4b08547. 671 files in one commit. Working tree now at 198 dirty (down from 750) — remaining is just runtime state I intentionally excluded. Snapshot: - ✅ Phoenix comm…
[Claude Code] 14:53, created: /home/justinwieb/forge/memory/handoffs/n8n-google-migration-strategy-2026-05-11.md

[Claude Code] Session Checkpoint (auto, 14:53)¶

Last: Strategy handoff written to forge/memory/handoffs/n8n-google-migration-strategy-2026-05-11.md. Re: "got ahead" — acknowledged, I stopped at the handoff write per the briefing's hard rule. No code t…

[Claude Code] Session Checkpoint (auto, 14:53)¶

Last: What's still on the list (concrete): 1. recall-v2-flip-decision followup still queued — we did the flip manually, so the followup is now a future no-op Sonnet call. Cancel it: `python3 forge/sc…

[Claude Code] Session Checkpoint (auto, 14:58)¶

Last: Done. Three edits to the handoff: 1. Bottom line reframed: P0 daily regression since 2026-04-30, not cleanup. 2. Risk table new top row: status-quo is itself the harm; "do nothing" is the bad…

[Claude Code] Session Checkpoint (auto, 14:58)¶

Last: {"facts": [{"topic_slug": "project_n8n_google_migration_morning_report_regression", "type": "project", "title": "n8n Google Migration: morning report email section broken since 2026-04-30", "descripti…

[auto-memory] 1 captured, 0 staged, 0 dropped (session a63034e7)¶

[Claude Code] Session Checkpoint (auto, 14:58)¶

Last: ```json { "thought": "Justin is frustrated. Remote spawn failed, headless worker is running but no result yet. I should acknowledge the failure directly, not be defensive, and give him a concrete ne…
[Claude Code] 14:58, created: /home/justinwieb/forge/.claude/skills/ssh-status/run.sh

[Claude Code] Session Checkpoint (auto, 14:59)¶

Last: ```json { "thought": "Justin said 'yes' in response to 'Want me to retry the remote spawn right now?' — retrying the remote spawn for the Gmail/n8n 500 debug session. spawn_remote_session is a cold …

[Claude Code] Session Checkpoint (auto, 14:59)¶

Last: ```json { "thought": "Justin said 'yes' to retrying the remote spawn. Spawning an Opus remote session focused on the n8n Gmail 500 error.", "actions": [ { "tool": "spawn_remote_session",…
[Claude Code] 15:00, created: /home/justinwieb/.claude/projects/-home-justinwieb-forge/memory/feedback_em_dash_enforcement_retired.md

[Claude Code] Session Checkpoint (auto, 15:02)¶

Last: All 8 reported. Big wins, two open threads. | # | Task | Result | |---|---|---| | 1 | Cancel recall flip followup | ✅ queue now empty | | 2 | context-prefetch timer | ✅ OnUnitInactiveSec=30min, nex…

[Claude Code] Session Checkpoint (auto, 18:46)¶

Last: Still here. Took a breather since you said quota-aware — nothing's running on my end except the n8n/Google strategy spawn (session_01PrfKYq5FceoP8pDDvyZaTh), which should be deep in deliverable C or…

[Claude Code] Session Checkpoint (auto, 18:48)¶

Last: Got a clearer picture. Networking is in a weird hybrid state: What's working: - All 9 fleet hosts SSH-reachable from Console via LAN (intra-LAN switch doesn't need the router) - Console reaches T…

[Claude Code] Session Checkpoint (auto, 18:49)¶

Last: {"facts": [{"topic_slug": "reference_plex_ct101_resource_constraints","type": "reference","title": "Plex CT 101 resource constraints and OOM risk","description": "CT 101 has 5GB RAM / 1GB swap; heavy …

[auto-memory] 0 captured, 1 staged, 0 dropped (session c39686d4)¶

[Claude Code] Session Checkpoint (auto, 18:49)¶

Last: Home Assistant is alive but cut off from the internet, same as everyone else. - HA UI/API reachable on LAN: http://192.168.86.70:8123 returns 200 in <1ms. Local automations (lights, switches, p…

[Claude Code] Session Checkpoint (auto, 18:50)¶

Justin asked: help diagnose new-router situation, check HA, ssh to Vector
Built/decided: confirmed gateway 192.168.86.1 dead post router swap; all 9 LAN hosts SSH-reachable intra-LAN; Finn offline in Tailscale (last seen 2h ago); HA alive on LAN but no WAN; Console has tailnet via DERP relay only
Next: Vector SSH for unspecified task; new router IP still unknown

[Claude Code] Session Checkpoint (auto, 19:07)¶

Last: Vector is offline — can't SSH. - 192.168.86.49 doesn't respond to ping or SSH from Console - Tailscale shows Vector offline, last seen 16 minutes ago - Not in any ARP neighbor table Most likely caus…

[Claude Code] Session Checkpoint (auto, 19:07)¶

Last: That log says Vector is back on the LAN but can't reach the Anthropic API — same root cause as the rest of the fleet. What's happening in the log: 1. Extension activates fine, MCP server up …

[Claude Code] Session Checkpoint (auto, 19:09)¶

Last: Yes, that explains everything — and it's bad news for the path of least resistance. The mismatch: your new router hands out 192.168.1.0/24 (gateway 192.168.1.1), but your entire fleet is stat…

[Claude Code] Session Checkpoint (auto, 19:12)¶

Last: Got router status info but no question attached. What would you like to do with it?…

[Claude Code] Session Checkpoint (auto, 19:13)¶

Last: Yes — and that's the smoking gun. Your LAN subnet changed from 192.168.86.0/24 to 192.168.1.0/24. Every device, alias, SSH config, and hardcoded IP in the fleet was written against .86.x. They'…

[Claude Code] Session Checkpoint (auto, 19:14)¶

Asked: Vector offline troubleshooting, then router status, then "can't we just fix the router?"
Diagnosed: LAN subnet changed from 192.168.86.0/24 → 192.168.1.0/24 (new router gateway 192.168.1.1). Fleet-wide IPs, SSH config, fleet.md, hardcoded scripts all stale.
Recommended: Use Tailscale IPs as bridge; sweep 192.168.86. across forge after WAN confirmed up.
Next: Decide router-fix-in-place vs. accept new subnet and rewrite refs.

[Claude Code] Session Checkpoint (auto, 19:14)¶

Last: Yes — that's the right move. Two ways to "fix the router": Option A: Set the new router's LAN to 192.168.86.0/24 (recommended) - Log into router admin at 192.168.1.1 - Change LAN subnet → `19…

[Claude Code] Session Checkpoint (auto, 19:17)¶

Last: Yes. Change those four fields to: - Router LAN IPv4 address: 192.168.86.1 - Subnet mask: 255.255.255.0 (leave as-is) - DHCP start address: 192.168.86.100 - DHCP end address: `19…

[Claude Code] Session Checkpoint (auto, 19:17)¶

Last: Nice. Give it ~30 seconds, then: 1. Toggle wifi off/on on your phone/laptop to grab a new .86.x lease 2. Try the router admin at http://192.168.86.1 to confirm 3. From Console, try pinging Fi…

[Claude Code] Session Checkpoint (auto, 19:18)¶

Last: Yeah, power-cycle it. Unplug, count to 10, plug back in. That forces a clean boot with the new LAN settings and clears any half-applied state. While it boots (~2 min for full ready), also power-cycle…

[Claude Code] Session Checkpoint (auto, 19:22)¶

Last: Router and Finn are back. Vector still offline. - ✅ 192.168.86.1 (router) UP - ✅ 192.168.86.50 (Finn) UP - ❌ 192.168.86.49 (Vector) DOWN Vector is the one machine that still needs hands-on att…
[Claude Code] 19:23, created: /tmp/checkpoint.txt

[Claude Code] Session Checkpoint (auto, 19:18)¶

Asked: Fleet test after router LAN reverted to 192.168.86.0/24.
Result: 10/13 hosts UP (router, Console, Finn, HA, Plex, media-server, AdGuard, n8n, Immich, Frigate). DOWN: Vector + Sol (personal endpoints, likely asleep) and minecraft LXC CT 110 (check pct status 110 on Finn).
Decision: Stayed on .86.0/24 by changing router LAN IPv4 + DHCP pool; no forge rewrites needed.
Next: Wake Vector/Sol; verify minecraft CT 110 autostart.

[Claude Code] Session Checkpoint (auto, 19:23)¶

Last: Checkpoint logged. Fleet recovered without forge rewrites — router config win. Want me to SSH into Finn and check minecraft CT 110, or leave it for later?…

[Claude Code] Session Checkpoint (auto, 19:45)¶

Last: Yep, still here. Awaiting your call on minecraft CT 110 — check it now, or leave for later?…

[Claude Code] Session Checkpoint (auto, 19:49)¶

Last: Yeah, that's a known BCM57810S issue. 10GBASE-T SFP+ modules pull 2.5–5W; the BCM57810S only budgets ~2.5W per cage, and a lot of implementations cap lower. The module enumerates but the PHY won't…

[Claude Code] Session Checkpoint (auto, 19:51)¶

Last: OK, here's what's happening on Finn: - nic3 has your 10GBASE-T module — kernel sees it, "Speed: Unknown!" = module inserted but no link negotiated - nic2 is empty/inactive (cached 10G sta…

[Claude Code] Session Checkpoint (auto, 19:53)¶

Last: Both modules report as "Copper pigtail" (the SFF code for DAC cables, but 10GBASE-T modules with cheap EEPROMs often misreport this way). Vendor strings: QINIYEK on nic2, OEM on nic3. The imp…
[Claude Code] 19:55, created: /tmp/checkpoint.txt

[Claude Code] Session Checkpoint (auto, 19:35)¶

Asked: Verify 10G SFP+ working on Finn after plugging modules for 8-gig WAN + Vector uplink.
Status: Finn nic3 (OEM module) UP at 10 Gbps stable; nic2 (QINIYEK module) module inserted but no link partner. Earlier flapping on nic3 resolved after both ends seated. Vector NIC (BCM57810S + 10GBASE-T module) still not powering up — needs replacement NIC (Intel X550-T2 / Aquantia AQC107 recommended).
Next: Confirm which physical port maps to WAN vs Vector; if nic2 = WAN, swap modules to test compatibility with GFiber router.

[Claude Code] Session Checkpoint (auto, 19:55)¶

Last: Checkpoint logged. Which physical port is which — WAN vs Vector?…

[Claude Code] Session Checkpoint (auto, 19:56)¶

Last: You've already got your answer from the link state. Logic chain: - The 8-gig internet → router → Finn is currently working (we confirmed earlier, router pinged, WAN IP active) - The cable to Vect…

[Claude Code] Session Checkpoint (auto, 19:58)¶

Last: You're right, I had it backwards. The actual topology: - nic0 (2.5GbE) → Google router → internet ← current WAN path - nic3 (10G SFP+) → direct DAC to Vector at 10.0.0.1 ✅ **working, ping…

[Claude Code] Session Checkpoint (auto, 20:01)¶

Last: ✅ nic2 is UP at 10 Gbps, link detected, stable. The down/up cycle kicked it. No flapping in dmesg. That confirms the QINIYEK module ↔ Cat6a 100ft ↔ GFiber 10G port path actually works — it just n…

[Claude Code] Session Checkpoint (auto, 20:06)¶

Last: 3.6 Gbps with 8 parallel streams from one server. That definitively proves the 10G LAN swap worked — you've broken past the old 2.5 Gbps cap. We hit 3.6 because a single CDN endpoint can't feed mo…
[Claude Code] 20:07, created: /tmp/checkpoint.txt

[Claude Code] Session Checkpoint (auto, 19:50)¶

Asked: Get 8-gig WAN to Finn via 10G SFP+, then route Vector's internet through Finn via the DAC.
Done: Migrated vmbr0 from nic0 (2.5G) → nic2 (QINIYEK 10GBASE-T module, Cat6a 100ft to GFiber router). Required ip link set nic2 down; up to negotiate. 8-stream Hetzner test = 3.6 Gbps (past old 2.5G cap; CDN-limited not link-limited).
Next: Set up Finn as NAT gateway for Vector (enable forwarding + MASQUERADE 10.0.0.0/24 → vmbr0); Vector points default gateway at 10.0.0.2.

[Claude Code] Session Checkpoint (auto, 20:07)¶

Last: Checkpoint logged. Ready to do the Finn-side NAT gateway setup when you say go.…

[Claude Code] Session Checkpoint (auto, 20:08)¶

Last: ✅ All set on Finn: - IP forwarding: ON (persisted to /etc/sysctl.d/99-forward.conf) - NAT MASQUERADE: 10.0.0.0/24 → vmbr0 - FORWARD chain: 10.0.0.0/24 ↔ established traffic allowed - Rules saved vi…

[Claude Code] Session Checkpoint (auto, 20:42)¶

Last: Spawned. Opus47 session is on it: 🔗 https://claude.ai/code/session_01NCi1uNVFGYkrEAiQSRbcDN It'll SSH into Plex + media-server, locate the Rogue One file, check audio tracks and recent Plex logs…

[Claude Code] Session Checkpoint (20:50)¶

Debug Plex Rogue One playback for brother. Diagnosed: ratingKey 1646, NAHOM 4K HDR DV BDRemux x265, Italian default audio. Plex log shows ERROR - Failed to start session + HTTP 404 on start.mkv for BOTH WAN (Wiebelhaus_Fishing) and LAN (justinwieb) attempts — transcoder process not spawning. Not the TrueHD/DTS audio default-track stall. Top suspect: CT 101 root 82% full (1.4G free). Reported diagnosis to Justin, awaiting go-ahead before touching cache or running audio-compat fixer.

[Claude Code] Session Checkpoint (auto, 20:43)¶

Last: Checkpoint appended. Diagnosis complete, awaiting your go-ahead on the fix order above (start with disk-pressure check on CT 101, then per-session transcoder log, then optionally the audio-compat fixe…

[Claude Code] Session Checkpoint (auto, 20:46)¶

[Claude Code] Session Checkpoint (21:00)¶

Plex Roku stall on Rogue One root-caused: NOT audio/disk/bandwidth. CT 101 ffmpeg dies with Failed to get number of OpenCL platforms: -1001 → Plex's HDR tonemap pipeline (tonemap_opencl) needs OpenCL → fails → entire pipeline drops to software 4K HEVC decode + libx264 encode → infinite buffer. VAAPI HEVC Main10 is fine; only OpenCL ICD missing in CT 101. Proposed fix: apt install intel-opencl-icd ocl-icd-libopencl1 clinfo on CT 101 + Plex restart. Awaiting Justin's go-ahead.

[Claude Code] Session Checkpoint (auto, 20:49)¶

Last: Checkpoint updated with OpenCL root-cause. Waiting on your go/no-go to apt install intel-opencl-icd ocl-icd-libopencl1 clinfo on CT 101 + Plex restart.…

[Claude Code] Session Checkpoint (auto, 20:52)¶

Last: Memory updated. Summary of what's now in place: - CT 101 has intel-opencl-icd, ocl-icd-libopencl1, clinfo installed (apt, from Ubuntu noble). - **/etc/tmpfiles.d/intel-render-symlink.conf…

[Claude Code] Session Checkpoint (auto, 20:54)¶

Last: 1080p, transcoded. Not 4K. Two reasons stacked: 1. DV Profile 5 is the wall. Plex's Roku-7.x profile explicitly excludes HEVC + Dolby Vision Profile 5 from direct play (`add-limitation ... v…

[Claude Code] Session Checkpoint (auto, 20:54)¶

Last: {"facts": [{"topic_slug": "reference_plex_dv5_roku_limitation", "type": "reference", "title": "Plex DV Profile 5 always transcodes on Roku", "description": "Dolby Vision Profile 5 BDRemux files never …

[auto-memory] 0 captured, 1 staged, 0 dropped (session 7312e334)¶

[Claude Code] Session Checkpoint (auto, 20:56)¶

Last: Status now: - ✅ OpenCL fixed (full HW pipeline engaging) - ❌ New blocker: h264_vaapi encoder is flooding the segment muxer with "too many packets buffered" — process is running for 16s of CPU time b…

[Claude Code] Session Checkpoint (auto, 20:57)¶

Last: {"facts":[{"topic_slug":"reference_plex_dv5_roku_limitation","type":"reference","title":"Plex Dolby Vision Profile 5 + Roku: always transcodes, never direct plays","description":"DV Profile 5 (single-…

[auto-memory] 0 captured, 2 staged, 0 dropped (session 7312e334)¶

[Claude Code] Session Checkpoint (auto, 20:57)¶

Last: You're right — don't disable global HW. That'd slow every other client's transcodes. This is a per-file problem. The encoder flood is triggered by the DV Profile 5 source specifically. Stripping …

[Claude Code] Session Checkpoint (21:15)¶

Plex GPU root cause fully unrolled: (1) CT 101 missing OpenCL ICD → installed intel-opencl-icd, (2) /dev/dri/by-path missing -render symlink for NEO compute-runtime → tmpfiles.d rule added. HW pipeline now engages (vaapi+tonemap_opencl+h264_vaapi). Remaining: h264_vaapi floods segment muxer on DV Profile 5 source — per-file issue, not global. Awaiting Justin's go on dovi_tool remove to strip DV5 layer from the Rogue One remux (will likely also enable 4K direct-play on Roku).

[Claude Code] Session Checkpoint (auto, 20:59)¶

Last: Checkpoint appended. Ready when you give the word on dovi_tool remove for the Rogue One file.…

[Claude Code] Session Checkpoint (auto, 21:01)¶

Last: Correction — I was wrong about DV5. Rogue One is DV Profile 8.1 (ma:DOVIBLCompatID:1, ma:DOVIProfile:8 — HDR10 base layer + DV enhancement layer, full HDR10 fallback baked in). **Library DV bre…

[Claude Code] Session Checkpoint (auto, 21:03)¶

Last: You're right, sorry. So the muxer flood is reproducible, not transient. That changes the answer. The real constraint: his Roku TV says it can only decode H.264 1080p. No HEVC at all. So every 4…

[Claude Code] Session Checkpoint (auto, 21:04)¶

Last: You're right, there is a clean software fix. The error is literally an ffmpeg muxer buffer overflow with a documented flag to fix it: -max_muxing_queue_size. Plex's ffmpeg invocation doesn't set…

[Claude Code] Session Checkpoint (auto, 21:05)¶

Last: {"facts": [{"topic_slug": "plex_h264_vaapi_muxer_overflow_shim","type": "reference","title": "Plex h264_vaapi muxer overflow: transcoder shim fix","description": "h264_vaapi 'too many packets buffered…

[auto-memory] 0 captured, 0 staged, 1 dropped (session 7312e334)¶

[Claude Code] Session Checkpoint (auto, 21:06)¶

Last: Yes, almost certainly. His Roku TV (Hisense 50R7+, Roku OS 15.x) supports AirPlay 2 — Roku added it in OS 9.4 for 2018+ models, and 15.x is way past that. Workflow: 1. Open Plex iOS app on his iPhone…
[Claude Code] 21:09, created: /tmp/checkpoint.txt

[Claude Code] Session Checkpoint (auto, 19:58)¶

Asked: Set up Finn as NAT gateway for Vector via DAC; spawn Opus to debug Plex Rogue One; explain practical value of 8-gig.
Done: Finn NAT live (ip_forward=1, MASQUERADE 10.0.0.0/24 → vmbr0, iptables-persistent saved). Vector still needs default-gateway change to 10.0.0.2. Plex debug spawned: https://claude.ai/code/session_01NCi1uNVFGYkrEAiQSRbcDN.
Next: Configure Vector default gateway 10.0.0.2 + DNS, then verify NAT flow from Finn (iptables -t nat -L POSTROUTING -nv packet counter); watch for Plex worker diagnosis.

[Claude Code] Session Checkpoint (auto, 21:18)¶

Last: Yeah, that's actually where the upload side matters — and Google Fiber's 8-gig is symmetric (8 Gbps up too, not just down). That's the rare quality of this tier vs typical residential internet…

[Claude Code] Session Checkpoint (auto, 21:19)¶

Last: Honestly? For 95% of people, 1 gig is plenty. Possibly even overkill. 1 gig handles all of this without breaking a sweat: - 4K Netflix/Disney+/YouTube on every screen in the house simultaneou…

[Claude Code] Session Checkpoint (auto, 22:41)¶

Last: Fixed. Sonarr searches should work now. Health check went from 4 warnings → 1. - ✅ "All search indexers unavailable" — gone - ✅ "All RSS indexers unavailable" — gone - ⚠️ Remaining: 3 indexers (L…

[Claude Code] Session Checkpoint (auto, 22:42)¶

Last: 🎉 Down to 1 warning. The "all unavailable" errors are gone. Only the 3 genuinely-failing indexers remain (LimeTorrents, EZTV, TorrentGalaxyClone) — those return http 400 even on a fresh test, mean…
[Claude Code] 22:45, created: /tmp/checkpoint.txt

[Claude Code] Session Checkpoint (auto, 20:10)¶

Asked: Sonarr returning no results; explain why qBit still works while indexers don't.
Done: Diagnosis = earlier network blip during router-swap caused SocketException 11 (EAGAIN) on indexer fetches → Sonarr put all indexers in temp-disabled state. Restart-cycle alone didn't clear it; force-tested each indexer via Sonarr API (/api/v3/indexer/test?forceTest=true) and removed cached failures. 5 of 8 indexers now healthy; 3 (LimeTorrents, EZTV, TorrentGalaxyClone) still 400 — current VPN exit IP blocked by those sites.
Next: If those 3 stay dead, disable in Sonarr or wait for gluetun IP rotation; verify Sonarr searches return results in UI.

[Claude Code] Session Checkpoint (auto, 22:45)¶

Last: Checkpoint logged. Sonarr should be searchable now.…

[Claude Code] Session Checkpoint (auto, 22:50)¶

Last: Two separate questions there: 1. Will speeds stay at 8 gig? No, almost certainly not for long. Google Fiber rate-limits at the ONT (the box on the wall) based on your plan. Plan changes usually …